Details

---

Objective evaluation of "unmeasurable materials"

The DigiSpec® series image spectrophotometer is a groundbreaking color measurement instrument that can be used in virtually all areas of color measurement. The image spectrophotometer can acquire color and spectral data for each point in the entire image per minute, with an area as small as 0.0016mm² (0.04mm*0.04mm), between square inches.
The image spectrophotometer uses an LED or xenon light source as the illumination source, which ensures that the traceability data is consistent with the previous generation of conventional spectrophotometers.

Complex color and mixed color measurement

The minimum measurement is 0.0016mm ²

Maximum repeatability deab ≤ 0.01

Traceability data consistency
 

Epoch making color measuring instrument

DigiSpec® Series image spectrophotometer can be applied to almost all color measurement fields

Textile industry: yarn, printing, lace, zipper, embroidery, etc

Construction industry: rock color paint, real stone paint, etc

Printing industry: wood grain paper, wallpaper, etc

Restoration of Cultural Relics: murals, calligraphy and painting, ceramics, etc

Others: buttons, jewelry, etc

 

Every inch is worth a penny

DigiSpec ® The color and spectral data of each point in the whole image can be obtained. In the area of 0.04mm * 0.04mm, the minimum measurement can be 0.0016mm ²

DigiSpec® It is helpful for the consistency of color evaluation in the whole production process

 

Digital transmission, fast and accurate color reproduction

The maximum value of measurement repeatability deab ≤ 0.01, whether measuring white standard plate or black standard plate digiscpec & reg; It can achieve the maximum measurement repeatability, deab ≤ 0.01 ※, and put forward a new standard of benchmark significance for desktop spectrophotometer

The perfect calibration structure and algorithm provide completely reliable short-term measurement stability and long-term measurement stability

 

※The surface color of different materials is greatly affected by temperature. Deab ≤ 0.01 is an extremely precise measurement stability condition. In the inspection of digiscpec & reg; When measuring repeatability, be sure to ensure the surface temperature stability of the measured object

 

Traceability data consistency

Using LED or xenon light source as lighting source can ensure the consistency of traceability data with the previous generation of traditional spectrophotometer

There are 20 + standard light sources and 30 + measurement indicators. SCI / SCE measurement conditions cover all the functions of the previous generation of spectrophotometer, and can provide the measurement parameters and conditions of the traditional spectrophotometer
 

Model	DS-1000	DS-1050	DS-1100
Geometry	Dual beam D / 8 ° , SCI / SCE
Light source	Full spectrum LED	High precision like sunlight full spectrum LED	High precision analog fluorescent xenon lamp light source
Sphere diameter	152mm/6in
Wavelength range	400nm-700nm		400nm-1000nm
Reporting interval	10nm	2.5nm
Photometric range	0-200%, resolution 0.01%
Repeated measurement of 30 times of double flash White color difference (CIE LAB)※	ΔE*ab≤0.03（Maximum）	ΔE*ab≤0.01（Maximum）
Inter-Instrument consistency for reflectance measurement  (CIELAB)※※	0.4	0.25
Aperture plate	Lav (30mm lighting, 25mm measurement), the user can set the measurement area and customize the caliber of any size
Test conditions	Compliance with standards:CIE No.15、GB/T 3978、GB 2893GB/T 18833、ISO7724/1、DIN5033 Teil7、 JIS Z8722 condition C、ASTM E1164、ASTM-D1003-07
Sensor	CMOS array sensor	Silicon based metal oxide image sensor
Spectroscopic modes	grating	Ultra high precision holographic transmission volume grating
Image resolution	300dpi	500dpi(high resolution)	600dpi(Ultra high resolution)
Minimum measurement area	better than 0.01mm² (0.1*0.1mm)	better than 0.004mm² (0.06*0.06mm)	better than 0.0016mm² (0.04*0.04mm)
Observer	2 ° standard observer and 10 ° standard observer
light source	A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30,DLF,NBF,TL83,TL84
Color space	L*a*b,L*C*h,Hunter Lab,Yxy,XYZ
Color index	WI(ASTM E313-00,ASTM E313-73，CIE/ISO,AATCC,Hunter,Taube,Berger Stensby)， YI(ASTM D1925,ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00),Isochromatic index milm, color fastness, Color fastness, ISO brightness, R457, a density, t density, e density, m density, hiding power, strength
Colour-difference formula	ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc,ΔE*94,ΔE*00,ΔEab(Hunter),555 hue classification
Test time	Less than 8 seconds	Less than 5 seconds
Working temperature and humidity	5 ~ 40 ° C, no condensation below 80% relative humidity (at 35 ° C)
Storage temperature and humidity	-20 ~ 45 ° C, no condensation below 80% relative humidity (at 35 ° C)
Accessories	Power adapter, data cable, whiteboard
Interface	USB 3.0

※ The measuring caliber is 25 * 25MM. After the instrument is calibrated, measure the BCRA white correction plate 30 times at an interval of 10 seconds

※※ Average value of measurement results of 12 BCRA ceramic standard color plates